Cutting Glass Ovals/Circles (Cont'd) - KEENCUT OVAL 6 Bedienungshandbuch

5.5 The Craftsman Toolset
WARNING: Wear eye and hand protection when handling glass.
Cutting glass Ovals/Circles
(optional)
7. Rotate the turntable one complete
revolution only. Stop when the score
line joins up.
8. Turn the glass over on the matboard
or a felt surface.
9. Press around the score line with the
thumb or tap it to make the cut.
10. Starting 1mm [ 1 /
line score four radial lines to the out-
side edge.
11. Turn the glass over.
12. Starting at the edge press with the
thumb or tap to break each score to
remove the cut piece.
5.5
"] from the score
16