Installation; Package Contents - OHAUS Traveler Bedienungsanleitung

EN-2
Key Name
Unit
No

2. INSTALLATION

2.1 Package Contents

•
Scale
•
Pan
•
Draft Shield
•
Power Adapter
• Calibration Weight (on some models, see Table 6.1)
•
Instruction Manual
•
Warranty Card
2.2. Location
Use the scale on a firm, steady surface. Avoid locations with excessive air currents,
vibrations, heat sources, or rapid temperature changes.
2.3. Transportation Lock, Calibration Lock & Pan Installation
Before using the scale the Transportation Lock must be released. At the bottom of the scale
slide the locking pin to the
If the scale is to be calibrated by the user ensure that the Calibration Lock is set to
position. See Figure 2-2.
Install the metal pan over the plastic sub-platform.
Figure 2-1. Release Transportation Lock
Function
• Primary function (Short Press)– Advances to next available
unit
• Menu function – (No) This key is used to reject the displayed
setting and advance to next available setting
position. See Figures 2-1.
Figure 2-2. Release Calibration Lock
™
Traveler Scales