•
Montieren Sie das Leg-Extension-Gestell (7) am vorderen Stützrahmen (8). Nutzen Sie eine M10X75mm Hex-
Schraube (79), zwei M10 Unterlegscheiben (92) und eine M10 Kunststoffmutter (96).
•
Bringen Sie das Sitzpolster (33) am Sitzgestell (9) an. Verschrauben Sie mit zwei M8X65mm Hex-Schrauben (86)
und zwei M8 Unterlegscheiben (93).
•
Bringen Sie das Rückenpolster (34) am Gestell für die Rückenlehne (17) an und verschrauben Sie mit zwei
M8X40mm Hex-Schrauben (87) und zwei M8 Unterlegscheiben (93).
•
Stecken Sie das Gestell für die Rückenlehne (17) in das Stützgerüst ein (4) und arretieren Sie mit dem Knauf (48).
•
Attach the Leg Extension Frame (7) to the Front Support Frame (8), using one M10X75mm Hex Bolt (79), two M10
Washers (92) and one M10 Nylon Nut (96).
•
Attach the Seat Cushion (33) to the Seat Frame (9), using two M8X65mm Hex Bolts (86) and two M8 Washers (93).
•
Attach the Backrest Cushion (34) to the Backrest Frame (17), using two M8X40mm Hex Bolts (87) and two M8
Washers (93).
•
Insert the Backrest Frame (17) into the Support Frame (4), using one Quick Knob (short) (48).
Aufbau / Assembly
Schritt 6
Step 6
21