Herunterladen Diese Seite drucken

capital sports Puissantor A15 Bedienungsanleitung Seite 19

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Montieren Sie das Sitzgestell (9) an das Stützgerüst (4). Nutzen Sie zwei M10X70mm Hex-Schrauben (80), vier M10
Unterlegscheiben (92) und zwei M10 Kunststoffmuttern (96).
Montieren Sie den vorderen Stützrahmen (8) am Sitzgestell (9). Verschrauben Sie mit einer M10X65mm Hex-
Schraube (81), zwei M10 Unterlegscheiben (92) und einer M10 Kinststoffmutter (96).
Montieren Sie den vorderen Stützrahmen dann (8) am Basisrahmen (2). Verschrauben Sie mit einer M10X70mm
Hex-Schraube (80), zwei M10 Unterlegscheiben (92) und einer M10 Kunststoffmutter (96).
Montieren Sie die „Arm Bracket" (14) am Stützrahmen (13). Verschrauben Sie mit zwei M10X65mm Hex-Schrauben
(81), zwei Unterlegscheiben (Ø28/Ø10) (99), zwei M10 Unterlegscheiben (92) und zwei M10 Kunststoffmuttern (96).
Montieren Sie die Arm Bracket (14) dann zum Stützgerüst (4), nutzen Sie zwei M10X70mm Hex-Schrauben (80),
vier M10 Unterlgescheiben (92) und zwei M10 Kunststoffmuttern (96).
Montieren Sie den Arm (15) an der Arm Bracket (14), unterstützen Sie mit der Achsmanschette (38) und arrettieren
Sie mit zwei M6X6mm Schrauben (101).
Attach the Seat Frame (9) to the Main Frame (4), using two M10X70mm Hex Bolts (80), four M10 Washers (92)
and two M10 Nylon Nuts (96).
Attach the Front Support Frame (8) to the Seat Frame (9), using one M10X65mm Hex Bolt (81), two M10 Washers
(92) and one M10 Nylon Nut (96).
Attach the Front Support Frame (8) to the Base Frame (2), using one M10X70mm Hex Bolt (80), two M10 Washers
(92) and one M10 Nylon Nut (96).
Attach the Arm Bracket (14) to the Support Frame (13), using two M10X65mm Hex Bolts (81), two Washers(
¢28X¢10) (99), two M10 Washers (92) and two M10 Nylon Nuts (96).
Attach the Arm Bracket (14) to the Main Frame (4), using two M10X70mm Hex Bolts (80), four M10 Washers (92)
and two M10 Nylon Nuts (96).
Insert the Arm (15) into the Arm Bracket (14), then attach the Axle Collar (38) to the Arm (15), using two M6X6mm
Screws (101).
Aufbau / Assembly
Schritt 5
Step 5
19

Werbung

loading