•
Verbinden Sie das rechte und das linke Verbindungsstück (11&12) mit der oberen Traverse (3). Nutzen Sie sechs
Muffen (39), den Schaft M16 (75), zwei M16 Unterlegscheiben (91) und die passenden M16 Kunststoffmuttern (95).
•
Bringen Sie die Armpresse (10) an den Verbindungsstücken an (11&12): Verbinden Sie mit sechs Muffen (39), einem
Schaft M16 (75), zwei M16 Unterlegscheiben (91) und zwei M16 Kunststoffmuttern (95).
•
Insert the Quick Knob (long) (50) through the single hole on the Press Arm (10) to any one of the holes on the fan-
type plate.
•
Attach the Left and Right Connect Frame (11&12) to the Upper Cross Beam (3), using six Oil Bushings (39), Shaft
(M16) (75), two M16 Washers (91) and two M16 Nylon Nuts (95).
•
Attach the Press Arm (10) to the Left and Right Connect Frame (11&12), using six Oil Bushings (39), Shaft (M16)
(75), two M16 Washers (91) and two M16 Nylon Nuts (95).
•
Insert the Quick Knob (long) (50) through the single hole on the Press Arm (10) to any one of the holes on the fan-
type plate.
Aufbau / Assembly
Schritt 4
Step 4
17