Installation; Instructions For Installation - KKT KOLBE WS1501S Bedienungsanleitung

Installation

Instructions for installation

!
• Before connecting the device to the mains, make sure that the
voltage and frequency correspond to the characteristics on
the type plate.
• This information must be observed to avoid damage to the
unit. If in doubt, consult an electrician.
• The socket outlet and the on/off switch should be easily
accessible after the unit has been installed.
• The warming drawer can only be used in conjunction with
equipment for which the manufacturer permits the installation
of warming drawers.
• If you are installing several heat drawers on top of each other,
make sure that you install an appropriate plate between them
to ensure that the weight is carried and the heat does not
accumulate.
• If you install the warming drawer as a combination unit, it
is important that you follow the dimensions exactly in the
following dimensional sketch.
38