Direct Wall Mounting - Endress+Hauser RIA14 Kurzanleitung

RIA14

3.3.2 Direct wall mounting

Proceed as follows to mount the device directly on the wall:
• Drill 2 holes
• Attach the device to the wall with 2 screws (∅5 mm (0,2 in)).
3.3.3 Pipe mounting
The mounting bracket is suited for pipes with a diameter between 38 to 84 mm (1.5 to 3.3 in).
Proceed as follows to mount the device on a pipe:
• Attach the mounting bracket to the pipe
• The additional mounting plate must be used for pipes with a diameter of 38 to 56 mm (1.5 to
2.2 in).
• Fix the device to the mounting bracket with the two screws supplied. The mounting plate is
not needed for pipes with a diameter of 56 to 84 mm (2.2 to 3.3 in).
Fig. 5: Mounting the field indicator on a pipe with mounting bracket for pipe diameter 1.5 to 2.2 in
Mounting kit, consisting of:
1: Mounting plate
2: Mounting bracket
3: 2 nuts M6
Endress+Hauser
Installation
a0011258
29