Care And Maintenance; Troubleshooting - Bose Solo 5 Bedienungsanleitung

C A R E A N D M A I N T E N A N C E

Troubleshooting

Problem
No power
No sound
3 0 - E N G L I S H
What to do
• Secure both ends of the power cord.
• Plug the power cord into a live AC (mains) outlet.
• Unplug the power cord for at least one minute and reconnect.
• Unmute the soundbar.
• Increase the volume.
• Plug the audio cable into a connector on your TV labelled Audio Output
or Audio OUT, not Audio Input or Audio IN.
• Use only one audio cable.
• Secure all cable connections and ensure they are correct.
• If you are using a cable/satellite box or other secondary source for
sound, select the correct TV input.
• Enable your TV's audio output and select the correct setting, such as
such as Stereo or 5.1 Channel Audio. Refer to your TV's owner's guide
for more information.
• Use alternate setup (see page 24).
• If connecting to two sources:
- Power off the other source.
- Ensure that you are not using an optical cable and coaxial cable.
• If the soundbar is connected to a TV output labelled VARIABLE (VAR),
power off your TV speakers, set your TV volume to 75 percent of
maximum and unmute your TV.
• If connecting through a TV headphones output, increase your TV
volume to the maximum limit.
• Unplug the power cord for at least one minute and reconnect.