Bose Solo 5 Bedienungsanleitung Seite 26

A LT E R N AT E S E T U P
Connecting a source's analog connector to the soundbar
If your source does not have an optical or coaxial connector, and only has analog
connectors (red and white), use a 3.5 mm to RCA stereo cable (not provided) to connect
to the soundbar.
1. If you have not already, disconnect your TV from the soundbar.
2. Insert the RCA analog cable into the Audio OUT RCA (red and white) connectors on
your source.
3. Insert the stereo plug into the soundbar's AUX connector.
Soundbar connector panel
2 6 - E N G L I S H
Audio OUT
Source connector panel
3.5 mm to RCA
stereo cable
(not provided)