Resetting The Bass Level; Dialogue Mode; Auto-Wake; Programming A Non-Bose Remote Control - Bose Solo 5 Bedienungsanleitung

U S I N G T H E S Y S T E M
3. Press the Bass button ( ).
The status indicator blinks white three times and the soundbar saves your settings.
Note: For optimal sound quality for dialogue-only programs, such as news and talk
shows, see "Dialogue mode."

Resetting the bass level

On the remote control, press and hold for five seconds to reset the bass level to
original factory settings.
The status indicator blinks white three times and remains solid white. The soundbar
returns to original factory settings.

Dialogue mode

Dialogue mode provides optimal sound quality for dialogue-only programs, such as
news and talk shows, by decreasing the soundbar's bass settings.
Press the dialogue button ( ) to toggle between dialogue mode and your default audio
settings.
The status indicator glows amber when dialogue mode is enabled.

Auto-wake

You can set the soundbar to power on whenever a sound signal is received.
Note: The soundbar powers off after 60 minutes of inactivity.
Press and hold on the remote for five seconds until you hear a tone to toggle
between auto-wake and default power settings.
The status indicator glows dim amber when the soundbar is off and auto-wake
is enabled.

Programming a non-Bose remote control

You can program a non-Bose remote control, such as your cable/satellite box remote,
to control the soundbar. Refer to your non-Bose remote control's owner's guide or
cable/satellite website for instructions.
Once programmed, the non-Bose remote performs basic functions such as power on/off
and volume.
2 0 - E N G L I S H