Mower Preparation For Transport And Working Position - Sip Silvercut Disc 300 Ts Rc Betriebsanleitung

2.6 Mower preparation for transport and working
position
– When preparing and performing the
procedure, no one should be near the
mower or between the tractor and the
mower. High risk of injury!
– Risk of material damage: do not engage
the PTO shaft in the transport position!
The discs must be completely still!
– Make sure to use protective equipment
according to the regulations while
driving on roads.
– When the mower is in the transport
position, the valve for raising the cutter
bar (7) must always be closed.
13
1A
1B 5
2
3
4
5
6
17
SILVERCUT
2
7 5