Troubleshooting; Reset Your Device - AIPTEK P8 Benutzerhandbuch

User's Manual

Troubleshooting

Problem
Power indicator is
not lit.
No start-up interface.
USB drive or
memory card is not
working.
The order of image
files is not what I
wanted.
The device
malfunctions and
cannot be powered
on/off.
Since there are many brands of memory cards, please test the compatibility on the
spot when you purchase the memory cards. This digital photo frame could not support
pirate cards. If the memory card is correctly inserted, and the start-up interface is
displayed but the photo frame can not read the card, please turn off and restart the photo
frame, or format the card and re-copy files.

Reset Your Device

Occasionally, you may need to reset your Photo
Frame.
This can be useful when a program is not performing
properly.
Locate the small hole on the back of the device shown
as the RESET.
Using the tip of paper clip, gently push the button
inwards.
www.aiptek.eu
Cause
Power is off or power indicator
is broken.
AC adapter is not well
connected or does not power
on normally.
Card is not correctly inserted or
card is corrupt or not fully
compatible.
The order of files is sorted by
file name. Numbers have
higher priority than alphabets.
Improper use of the device.
Page 14
Solution
Check whether the AC
adapter is well
connected and power
supply is normal.
Check whether the AC
adapter is well
connected and make
sure the photo frame is
powered on normally.
Insert the card
correctly; format the
card before copy files,
or replace with a new
card.
Rename the files.
Press into the reset
hole and hold for 2
seconds. Then press
the Power key to
power on the device
again.
Reset Hole