Power On/Off Your Photo Frame; Charging The Battery; Setting Up Language - AIPTEK P8 Benutzerhandbuch

User's Manual

Power on/off your photo frame

To power on the photo frame, please press the Power button for 2
seconds. To power off the photo frame, please press the Power
button again.

Charging the battery

The internal battery of the device may not be fully charged when you use the photo frame
for the first time. You can charge the battery in the following two ways:
Plug the AC power adapter into the DC-IN jack of the device, and connect the other
●
end to the power source.
Connect the small end of the supplied USB cable to the USB port of the device, and
●
the large end to a powered PC. Make sure the photo frame is powered off.
Charging Status
Power OFF, charging by AC power adapter
Power OFF, charging by USB connection

Setting up language

1. On the Main Menu, select the SETUP item and press OK (
setup of your 3D Digital Photo Frame.
2. Move the Menu Navigation up or down to choose the desired language and press
OK ( ) to confirm.
www.aiptek.eu
Charging Time
around 2 hours
around 12 hours
Page 4
) to configure the basic