Shimano Nexus Di2 Originalbetriebsanleitung Seite 6

English–3
eShift with manual Shimano Di2 hub gears
Use the Shimano gearstick to shift gears in manual mode.
eShift with the Intuvia on-board computer
The engaged gear will be shown briefly on the display when-
ever the gear of the gear hub is shifted.
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to a
set "Start gear". The "Start gear" can be set in the basic set-
tings menu.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
– ...
– "– Start gear +": The starting gear can be set here. In the
"––" position, the automatic function for shifting down a
gear is switched off. This menu item is displayed only when
the on-board computer is in the holder.
– "Gear adjustment": This menu item can be used to per-
form precision adjustment on the Shimano Di2. The pre-
defined adjustment range can be found in the operating
instructions provided by the transmission manufacturer.
Perform precision adjustment as soon as you hear the
gearing make unusual noises. This menu item is displayed
only when the on-board computer is in the holder.
eShift with the Nyon on-board computer
The gear is always displayed in the eShift field. The gear is
displayed briefly during a gear shift only when the eShift field
is not visible (e.g. in settings).
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to a
set "Start gear". The "Start gear" can be set under
"My eBike" > "eShift".
Bosch eBike Systems
– ...
– "Gear vx.x.x.x": This is the software version of the
variable speed transmission. This menu item is displayed
only when the on-board computer is in the holder. This
menu item is only displayed in conjunction with an elec-
tronic variable speed transmission.
– ...
Intuvia eShift function displays
You can choose from the following additional functions in the
function display (combination of text display and value
display):
– ...
– "Gear": The currently engaged gear is shown on the
display. The newly engaged gear is briefly shown on the
display each time the gear is changed.
– ...
0 275 007 XES | (22.6.17)