Life Phases; Transport And Storage; General Information On Installation - Phoenix Mecano LBG1 Montageanleitung

7. Life Phases

7.1 Transport and storage

The product is to be checked by suitable personnel for visible and functional damage.
Damage caused by transport and storage must be reported to the responsible person and
Phoenix Mecano Komponenten AG immediately .
It is forbidden to put damaged controllers into operation.
The following ambient conditions are specified for storing the controllers:
•
contact with solvent-based paints must be avoided
•
Lowest / highest ambient temperature: -20 deg. Celsius / +60 deg. Celsius
•
Relative humidity in storage: falling below the dew point is not permitted
Divergent environmental factors must be approved by Phoenix Mecano Komponenten AG

7.2 General information on installation

The controller is only to be fixed at the points specified for the installation.
LBG controller- dimensional drawing
Cable for switch with
coupling DIN 45 326 SP
20
26
Connecting cable for
1 to 3 electric cylinders Feed line, 3 metres
M5
130
(170)
20
20
95
20
(135)