General Notes; Information About These Assembly Instructions - Phoenix Mecano LBG1 Montageanleitung

2. General Notes

2.1 Information about these assembly instructions

These assembly instructions are only applicable to the controllers described and are intended as
documentation for the manufacturer of the end product in which this partially completed
machine is incorporated.
We wish to explicitly point out that the manufacturer of the end product must produce an opera-
ting manual for the end user containing all the functions and hazard warnings of the end pro-
duct.
This also applies to installation in a machine. In this case, the manufacturer of the machine is re-
sponsible for the relevant safety devices, checks, monitoring potential crushing and shearing
points and the documentation.
These assembly instructions will help you,
•
to avoid hazards,
•
to prevent downtime,
•
and to guarantee and increase the working life of this product.
Hazards warnings, safety regulations and the information in these assembly instructions are to be
observed at all times.
These assembly instructions must be read and applied by everyone who works with the product.
Putting into operation is forbidden until the machine complies with the provisions of EC Directive
2006/42/EC (Machinery Directive). Before bringing onto the market, this must comply with the
CE Directives, including documentation.
We hereby inform any re-user of this partially completed machine / partial machine / machine
parts explicitly of its obligation to expand and complete this documentation. In particular, when
installing or attaching electrical components and / or drives, the re-user is to complete a CE decla-
ration of conformity.
Our Declaration of Conformity automatically looses its validity.
20