Klarstein 10029629 Sicherheitshinweise Seite 26

Reversing the door
Warning: To avoid accidents during the process of changing the door, we recommend that you get
assistance. The glass door is heavy and may cause injury if dropped.
1. To put the cabinet on open operation place;
2. The door opened to the maximum angle, take off the decorative nail on opposite side (Drawing 1);
3. To disassemble the pivot core of upper and lower door hinge by the inner six angle screwdriver (Drawing
1);
4. To suck out the door shaft core from the two ends of the top of the door by magnet (Drawing 3).
5. Take away the door from cabinet after discharge the door core.
6. Discharge the upper and lower door hinge by screwdriver (Drawing 4).
7. Assemble the door on the opposite side with accessories in accessory bag.
1
9
1
1
1 M5 door hinge screw
2 M4 six angle screwdriver
3 M4 door limit screw
4 Pincer
5 Door core
2
3
2
2 3
3
6
4
5
5
6
4
6 Slot type screwdriver
7 Upper door hinge
8 Lower door hinge
9 M5 six angle screwdriver
4
9
8
7
9
8
10
26