Settings - Klarstein 10029629 Sicherheitshinweise

Please note that depending on the loading and settings chosen it takes about 24 hours for the wine cellar to
see the temperature stabilizing.
During this time LED seems to move erratically in particular for "D" models. It is normal and this process
occurs whenever the setting is modified and/or whenever a large amount of bottles are added to the cellar.
Designed to store and mature all wines: red, white and sparkling. These wine cellars reproduce the ideal con-
ditions for wine storage, at a constant recommended temperature of 12ºC. They can also be set to provide
ideal serving temperature for full enjoyment of the wine' s qualities. Unless stated by the wine maker on the
bottle, VINICOLE recommends 7ºC for your champagne, 12ºC for whites and 18ºC for reds. (Refer to "Wine
Service Temperature" recommendation chart).
Control panel and LED
From left to right:

"ON/OFF" the power button :
Press the button 3 seconds to power off . ( Anzeige des Countdowns 3, 2, 1). digital countdown dis-
plays 3, 2, 1, press the button for 0.9 seconds after the window just POP countdown numbers). Remark:
The other functions will turn off except light switch when the power turns off. Press again (without
1 2 3
delay), the power turns on.

Upper zone temperature setting up button:
3s
Press one time, window  the set value will increase 1 degree Celsius in the original setting tempera-
3 4 5 6 7 8
ture, the setting range according to customer requirements.

Upper zone temperature setting down button :
C/F 3s
Press one time, window  the set value will reduce 1 degree Celsius in the original setting temperature,
the setting range according to customer requirements.

Window :
Display upper zone temperature, display odd numbers "E1, E2" code.
1 2
3s
4 5 6 7 8
C/F
3s

Settings

3 4 5 6 7 8
C/F
3s
22