General; Warranty; Safety Tips - Becker Centronic SunWindControl SWC442 Bedienungsanleitung

Operating Instructions
The SWC442 can be used to operate one or more sun protection systems and
to set threshold values for sun protection and wind control with the help of the
setting aid provided.
This device is excellent because it is so easy to operate.
Becker Antriebe GmbH will be released from all warranty and product liability
obligations if the customer modifi es the equipment without prior approval from
Becker Antriebe GmbH or if the equipment is installed incorrectly and/or con-
trary to these installation instructions, by the customer or a third party.
Any further processing must comply with all current statutory and offi cial regu-
lations governing manufacture and advice to customers, especially the EMC
regulations.
Caution
Please keep the instructions in a safe place!
• Use in dry rooms only.
• Use unmodifi ed Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• Dispose of used batteries properly. Replace batteries by an identical
type (LR 03; AAA) only.
• If the system is controlled using one or several transmitters, the sys-
tem guide track must be visible during operation.
• Please refer to the specifi cations given in the operating instructions
for the sun protection system
14

General

Warranty

Safety tips