Operating Instructions
The EC545 may be used to control up to 5 receivers via designated channels,
either individually or all at once.
This device is excellent because it is so easy to operate.
Becker Antriebe GmbH will be released from all warranty and product liability
obligations if the customer modifi es the equipment without prior approval from
Becker Antriebe GmbH or if the equipment is installed incorrectly and/or con-
trary to these installation instructions, by the customer or a third party.
Any further processing must comply with all current statutory and offi cial regu-
lations governing manufacture and advice to customers, especially the EMC
regulations.
Danger
Please keep the instructions in a safe place!
• Use in dry rooms only.
• Use unmodifi ed Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• Dispose of used batteries properly. Replace batteries by an identical
type (LR 03; AAA) only.
• If the system is controlled using one or several transmitters, the sys-
tem guide track must be visible during operation.
10
General
Warranty
Safety Information