Cleaning Method - Mediclinics M96 Montage- Und Benutzerhandbuch

PREVENTATIVE MAINTENANCE AND CLEANING
Correct cleaning of the machine will lengthen its working life
considerably.
When in use, the machine will accumulate dust inside which should
be cleaned out if used regularly, at least once a year.

CLEANING METHOD

1. Disconnect the dryer lead-in wire.
2. Unscrew the 4 side attachment screws using a Phillips screwdriver.
3. Remove cover (See dismantling for installation).
4. Remove the accumulated dust in the fan wheel with a soft bristle
brush.
5. Using the same brush, remove the dust accumulated in the out grill.
6. Brush the sides between the support and the wall.
7. We recommend removing the machine from the wall and
unscrewing the four mounting bolts to remove any obstructions
(paper, cigarette ends, etc.)
8. In case of having dismantled the air outlet, install it again in its
place and ensure that it is in its proper position.
9. When maintenance is complete, screw the base to the wall (if
applicable), re-mount the cover, tighten up the screws and plug in.
10. Switch on the machine and leave running until all traces of dust
from the cleaning proces have been discharged from the air stream.
Caution: do not damage or force any machine part.
-15-
www.mediclinics.com