Setting Units (St. ); Key Sound - Vetus COMBI4 Bedienungshandbuch Und Einbauanleitung

4.1.3 Setting units (St. 3)
The following units can be selected:
- metres ' M ' or feet ' Ft ' for the depth.
- knots ' Knt ' (nautical miles per hour) or
km/h ' KM/h ' for the speed.
- degrees Celsius ' °C 'or Fahrenheit ' F
'for the water temperature.
To change the units act as follows:
Changing metres
• Press when in the main menu to
open the menus.
• Press 2 x to select the units menu
(St. 3 UNIT SELECT).
• Press 2 x to open the depth units
menu.
• Press to select the other unit.
• Press briefly to activate the set
value and return to the main menu or:
• Press for longer than two sec-
onds to return to the main screen.
Changing knots
• Press when in the main menu to
open the menus.
• Press 2 x to select the units menu
(St. 3 UNIT SELECT).
• Then press
to open the speed units menu.
• Press to select the other unit.
• Press briefly to activate the set
value and return to the main menu or:
• Press for longer than two sec-
onds to return to the main screen.
COMBI 4
feet
km/h
, and again on
Changing Celsius
• Press when in the main menu to
open the menus.
• Press 2 x to select the units menu
(St. 3 UNIT SELECT).
• Then press
again on to open the temperature
units menu.
• Press to select the other unit.
• Press briefly to activate the set
value and return to the main menu or:
• Press for longer than two sec-
onds to return to the main screen.
4.1.4 Key sound (St. 4)
The key sound can be switched on or off.
• Press when in the main menu to
open the menus.
• Press x to select the key sound
menu (St. 4 KEY SOUND).
• Press to open the key sound
menu.
• Press /
OFF.
• Press briefly to activate the set
value and return to the main menu or:
• Press for longer than two sec-
onds to return to the main screen.
ENGLISH
Fahrenheit
, 2 x on and
to select ON or
21
100609.01