CareFusion MicroLoop Betriebshandbuch Seite 65

Touch the 'Patients' icon to enter the
patient database. The required patient is
selected from the stored patient list. If
the patient details have not been
previously stored then touch Add to enter
the new details. The patient details may
also be downloaded from the optional
SPCS software.
Once selected patient's name will appear
at the bottom of the screen.
Use the help button to obtain further
information..
To add a patient to the database use the
on screen keyboard to type a unique
patient ID and then touch the enter key.
You will then be prompted for Last Name,
First Name, Sex, Ethnic Origin, Height,
Weight, date of Birth and Factor. A factor
can be applied when testing individuals of
other ethnic origins who would not
normally be tested against the countries
set of predicted values e.g. ECCS
predicted values are used but Non
Caucasian individuals tested. The factor
alters the predicted value set on volume
indices by the percentage applied. If
NHANES predicted values are selected,
then the ethnic origin field should be
chosen but a factor correction is not
required.
63