Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.6. M
ETHODS OF USE
4.6.1. W
-
ORK
PROCESS SELECTION
Put the knob (10) on the function you selected for the blowing torch (1):
Cleaning
Setting
Solutions
Neutral Bomar (44a)
AC
Tig Bomar (44b)
Brill Bomar (44c)
Polishing
Setting
Solutions
DC
Brill Bomar (44c)
Notes:
(*)
POWER BRUSH is ideal for inside corners and hard to reach areas.
(**) The Big graphite insert 45mm is ideal for cleaning large surfaces.
4.6.2. P
OWER REGULATION
The machine Clinox Power allows adjustment of the processing power acting on the central selector knob (11).
The following table suggests the power levels in which it is possible to work according to the size of the inserts and the pads
installed on the torch (1).
PAY ATTENTION: The table is only for guidance, before cleaning / polishing is appropriate to carry out tests
on small samples to identify the correct setting even on the basis of surface finish and do
not spoil the product.
Cleaning
Setting
Narrow inserts (16 b/d)
Large inserts (16 a/c)
AC
POWER BRUSH (51)*
Big graphite insert 45mm (48)**
Polishing
Setting
Narrow inserts (16 b/d)
Large inserts (16 a/c)
DC
POWER BRUSH (51)*
Big graphite insert 45mm (48)**
Note:
(*)
POWER BRUSH is ideal for inside corners and hard to reach areas.
(**) The Big graphite insert 45mm is ideal for cleaning large surfaces.
CLINOX POWER
:
CLEANING AND POLISHING
(operating knob - 10)
Tungsten insert (16)
Tungsten insert (16)
POWER BRUSH (51)*
Big graphite insert 45mm (48)**
Tungsten insert (16)
POWER BRUSH (51)*
Big graphite insert 45mm (48)**
(power knob - 11)
Inserts
Narrow pads (46b – 28 b/d)
Large pads (46a – 28 a/c)
Big Bond pads 45mm (49)
Inserts
Narrow pads (46b – 28 b/d)
Large pads (46a – 28 a/c)
Big Bond pads 45mm (49)
Inserts
Standard bond pad (46)
Tig bond pad (28)
-
Big Bond pad 45mm (49)
Inserts
Tig bond pad (28)
-
Big Bond pad 45mm (49)
Pads
-
Pads
-
37
Pads
Pads
Power regulation
1
2
3
4
1
2
3
4
Werbung
Inhaltsverzeichnis
