Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. SAFETY
The machine is constructed in compliance with established EU safety standards and bears the CE mark.
The CLINOX POWER is a machine for the surface cleaning of stainless steel and it can be employed with a high degree of
safety on condition that all safety standards, common sense, Manufacturer's instructions and established legislation are
observed. It is thus essential that the safety manager makes sure that his staff read this manual before operating the machine.
2.1. P
ERSONAL PROTECTIVE EQUIPMENT
The use of the machine requires the use of personal protection devices such as:
protective gloves;
protective goggles;
mask filtering (in the absence of smoke extraction system).
The treatments made with the machine must be carried out in well-ventilated areas to prevent operator exposure to
fumes that may be generated during processing. If is using the machine indoors and / or using the small torch (23) it
must be in place an adequate intake system.
P
REVENTION OF BURNS
During
the
components involved in the process and
the torch can reach temperatures (higher
than 180° C).
Special protective gloves must be used
when you handle the stainless steel
work pieces and during the use of the
torch. Similar precautions must be followed
in order to replace the special pads and the
inserts.
E
LECTROLYTIC SOLUTIONS
To operate this machine you have to use
electrolytic solutions called BOMAR, these
products are corrosive or irritating for eyes
or skin.
Adequate protective devices, such as
gloves, goggles and safety clothes,
must be worn during the use of the
machine
contact.
Do not use products which are different
from the ones stated in this operating
manual (in case of use of other products
any
guarantee
moreover do not mix them with other
products. Keep the electrolytes in a safe
place and in the original container.
In case of accidental contact with eyes
or skin or ingestion, please follow the
instructions stated on the safety data
sheets of the products. It is possible to
require a copy of safety data sheet to:
N
-G
ITTY
RITTY
Phone: +39 059 785210
E-mail: info@nitty-gritty.it
CLINOX POWER
work-process
both
in
order
to
avoid
direct
will
be
invalidated)
T
the
Usually toxic fumes are generated during
the work processes: take precautions to
prevent exposure of the operator or other
persons.
The machine is equipped with an
integrated abatement fumes system,
which starts automatically when the
machine is switched on.
In order for the vapor abatement system is
active during processing, is necessary to
connect the machine to the compressed air
system.
The
CLEAN&BRILL
integrated system of the vapors; in this
case you need to use the machine with
adequate
In the absence or inability to provide the
work station of a smoke extraction system,
you can use an adequate filter mask for the
type of electrolyte used (FFP2, FFP1......).
E
All electric shocks are potentially lethal. Do
not use the machine in humid places.
Never touch the live areas. Even in case of
a light feeling of electric shock, stop the
cleaning operations and do not use the unit
until the problem is found and solved by
qualified personnel. Frequently check the
feeding cable; if the covering of the supply
cable is damaged or cracked, replace it
immediately. The maintenance of the
electrical
performed only after disconnecting the
unit.
Any maintenance of electrical components
must be performed only by qualified
personnel.
Always replace any damaged parts of the
unit with original spare parts.
33
OXIC FUMES
use
of
small
torch
KIT
(B)
suction
system
FFP2 (Tig Bomar, Brill Bomar)
FFP1 (Neutral Bomar)
LECTRIC SHOCK
components
(23)
of
disables
the
in
function.
must
be
Werbung
Inhaltsverzeichnis
