Sartorius PT-10 Betriebsanleitung Seite 10

10
Installing Electrodes
You can use the following electrodes with the
PT portable meter:
– Combination pH electrode with BNC connector
– Separate 2.5 mm phone jack for the ATC probe
– Ion-selective or ORP (redox) electrode with BNC
connector
Installation
1. Remove the protective cover from the electrode.
2. If the pH electrode is dry (e.g., when it is new),
soak it overnight in an electrode filling solution,
3-mol/l KCl solution or electrode storage solution
before use.