Before Installation - NARVI NC ELECTRIC 9 kW Installation Und Betriebsanleitung

GB
INSTALLATION AND OPERATING INSTRUCTIONS
NARVI NC 6kW
NARVI NC 9kW
1. THE ELECTRIC SAUNA HEATER PACKAGE INCLUDES:
1. Jacket for sauna heater
2. Stone space with control unit
3. Attachment plate + attachment nuts
4. Installation and operating instructions

2. BEFORE INSTALLATION:

Check the following:
- The output of the sauna heater (in kW) is correct with respect to the size of the sauna (m
- The recommended volume of the sauna for each heater type is presented in the Table 1.
- If there is uninsulated brick, tile or glass wall surface in the sauna, to the inner volume of the sauna,
add 1.5 m for every 1 m
3
the Table 1.
The volume of the sauna must be within the minimum and maximum values given by Table 1.
Table 1 Installation data for the NARVI NC heater
Heater Capacity
model
min
kW
NARVI NC 6
NARVI NC 9
- The minimum height of the steam room and the minimum safe distances are defined in the Table 1.
- Ensure that the surface, to which the attachment plate screws are fixed, is sufficiently firm.
A thin panel alone is not sufficient. Additional studding as a reinforcement behind the panel or
reinforcement irons on top of the panel fastened to the wall studding can make the required
reinforcement.
- The NARVI NC sauna heaters of 6.0 kW can also be installed in a wall recess, provided that the safe
distances given by Figure 1 are observed.
- The NARVI NC heater of 9.0 kW must not be installed in a wall recess.
INSTALLATION OF MORE THAN ONE ELECTRIC HEATER IN THE SAUNA IS NOT ALLOWED.
of such wall surface, when selecting the heater with the correct output in
2
Steam room
Volume Height At the
side
max min A **)
m 3 m 3 cm cm
6 9 190 5
9 15 190 5
**) See Figure 1
white black
900513 900523
900515 900525
Minimum safe distances to the heater
In the In the To the
front front ceiling
B **) C **) D **)
cm cm cm
8 2 115
10 2 115
*) Use a rubber-sheathed cable of type H07RN-F or equivalent
as the connecting cable
).
3
Stone Connection *)
volume
To the 400 V 3N
floor
E **)
cm kg mm 2
12 25 5x1,5
12 25 5x2,5
Fuses
A
3x10
3x16