Optelec FarView Bedienungsanleitung Seite 46

Optelec
Brightness is unstable
Monitor flickers indoors
Black/blue/red/green dots or interference
appears. Monitor looks distorted when touched
Playback
Questions
Cannot view pictures
Picture is too bright or too dark
Connection with an external monitor or PC
Questions
English
mode. Press any button, except for the on / off
button, to switch the lights back on.
This might occur when the aperture value is
set (this does not affect the recorded pictures.)
Monitor may flicker after switching unit on (this
prevents any influences from fluorescent
lighting).
This is not a malfunction. These dots will not
be recorded on the actual picture.
Answers
 Check if the unit is set to playback
mode.
 No pictures in the internal memory.
 Check if the unit is set to playback
mode.
 Adjust the brightness by rotating the
contrast adjustment button.
Answers
FarView
Page 46