Preparations
1) Place the appliance on a horizontal, level, stable and heat-resistant surface .
NOTE
►
If you wish to place the deep fat fryer below the cooker extraction hood,
ensure that the cooker is switched off .
2) Unwind all of the power cable from the cable retainer 4 .
3) Press the lid release button 9 . The appliance lid flips open .
4) Remove the frying basket q and attach the handle 0:
–
press the handles 0 together so that the holding pins can be inserted into
the eyelets on the frying basket q . The handles 0 must lie under the
upper end of the connecting piece on the frying basket q:
–
Loosen your grip on the pressed-together rods on the handle 0 so that
the holding pins project into the holes:
SFM 850 A2
GB │ IE │ NI
│
9
■