Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Mounting
For mounting the CCU3 to a wall using the supplied
screws and plugs, please proceed as follows:
•
Select a suitable mounting location on the wall,
close to your router and a socket.
Make sure that no electricity or similar lines run at
this location!
•
Use a pen to mark the positions of the two bore
holes for the brackets (E) with a distance of 90
mm on the wall (see fig. 2).
•
Use an appropriate drill to make the 5 mm holes
as illustrated.
•
Insert the plugs in the holes.
•
Turn the screws into the plugs so that they pro-
trude from the wall by approx. 2.5 mm. Hang the
device using the brackets on the back behind the
screw heads.
Mounting
37
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
