Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Raise the lawn tractor around ten centimetres, then secure the front wheels to the wheel supports using the
straps provided.
Finish lifting the mower and insert the safety pin in one of the two holes provided in the support and fasten
the pin with the R-clip (Figure 5).
NEVER WORK DIRECTLY UNDERNEATH THE RIDE-ON LAWN MOWER
Once the maintenance operation is over, remove the safety pin and lower the mower by slowly and gradually
turning the lever to the left to open the hydraulic jack lowering mechanism.
On lowering, Cliplift Pro may move back slightly; it is therefore essential to stand to one side
Fig. 5
.
EN
Werbung
