Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Position the wheel supports on the mounting base of the lifting mechanism, inserting the locking pin in
the hole in the base. Fasten the locking pin with linchpin c.
Depending on the diameter of the mower's front wheels, position the intermediate adjustment pins on the
wheel supports and lock them with R-clips. Use of adjustment pins is not necessary for large diameter front
wheels
.
2-USE
CLIPLIFT PRO must be used on firm, level, even ground by a single operator. Make sure that
you have sufficient clear space and keep all people and/or animals clear.
With the mower's rear basket removed or raised, drive the mower forward until the front wheels are in
position on the wheel supports on the ground, ensuring that the mower is correctly centred. Switch off the
engine and put out of gear.
To begin lifting, turn the lever to the right to close the jack lowering device (1) and activate the lever (2).
c
1
2
EN
Werbung
