ULTIMATE SPEED KH 4106 Bedienungsanleitung Seite 10

2. Insert the cigar lighter plug
the vehicle.
3. Check to see if an adaptor is required for use on the object to be
inflated. Should this be the case: Press resp. screw the required
adaptor into the opening of the connection valve
4. Check to ensure that the fastening lever of the connection valve
is open. When open, the fastening lever is in a vertical position.
5. Press the opened connection valve
to be inflated. Press it down so that it is firmly seated. Should you be
using one of the adaptors
adaptor into the valve of the object to be inflated.
6. Close the connection valve
down. Continue to firmly hold the connection valve down. Ensure
that the connection valve cannot disconnect itself from the valve of
the object being inflated.
u
firmly into the cigar lighter holder in
r
onto the valve of the object
i
: Press the connection valve with the
r
, in that the fastening lever is pressed
8
r
.
r