Technical Specifications - Walimex Pro Operator TTL Gebrauchsanleitung

10. Technical specifications
Model Walimex pro Operator TTL T-C
Compatible camera Canon EOS camera, supporting E-TTL II/E-
TTL autoflash: Canon 450D/700D/750D/7D/
5D2/5D3/6D/7D2/1D3/1D4/5D4/5DS/1DX/
70D/5DSR/6D2/80D*
Exposure control system E-TTL II/E-TTL autoflash, manual flash,
stroboscopic flash
Channel Ch. 1 - 8
Wireless radio ID 1 - 30
Slave unit control Each channel controls 3 groups of slave units
separately (A,B,C)
Transmission distance around 25 meters
Flash ratio control 1:8-1:1-8:1, 1/2 f-stop increment
Flash exposure compen- ±3 stops in 1/3 increment
sation (FEC)
Flash exposure bracketing ±3 stops in 1/3 increments
Flash exposure lock Yes
High speed sync up to 1/8000 s
Manual flash Output control range from 1/1 -1/128
(in 1/3 EV increment)
Stroboscopic flash up to 20 flashes, up to 30 Hz frequency
AF assist beam Yes
Fireware update Yes
Power Source Two AA alkaline batteries or Ni-MH batteries
Size 90*56*40 mm
Weight 105 g
*This table only lists the tested camera models, not all Canon cameras. For
compatibility of other camera models, a self-test is recommended. Rights to
modify this table are retained.
63 64