Testing; Transmitter Control From The Camera's Menu Screen - Walimex Pro Operator Ttl Gebrauchsanleitung

7.12 Testing

Press the [TEST] button; the radio transmission confirmation lamp lights up red.
You can now test whether the flash triggers normally.

7.13 Transmitter control from the camera's menu screen

Set flash functions and radio transmitter functions from the camera's menu screen.
1. Slide the transmitter's mounting foot fully into the camera's hot shoe. Rotate
the locking ring clockwise to firmly attach the transmitter to the camera. Turn
on the radio transmitter by turning the [POWER] button to the right.
2. Turn on the camera. Set to M (manual). Set your camera to manual mode by
turning the mode dial to the "M" setting.
3. P ress the [MENU] button on the camera and select [External Speedlite Cont-
rol] or [Flash control], and press the [SET] button.
4. Select [Flash function settings] and press the [SET] button.
NOTICE
The setting screen varies depending on the camera.
55
7.13.1 Gr mode control from the camera
1. Select channel, ID and group on the Walimex pro Operator TTL T-C
radio transmitter:
When using the radio transmitter in Gr mode, please set the radio trans-
mitter and flash to the same channel and ID. Depending on the shooting
situation,
divide the flashes into A/B/C groups. Select the group that you are going to
set up via radio transmitter. For example, if you would like to set up flashes in
group A, press the [GROUP] button on the radio transmitter and select <A>.
2. S elect wireless flash function [OFF]:
Under the [Flash function settings] menu, set the wireless flash function to [OFF].
3. Select Flash Mode:
Under the [Flash function settings] menu, select flash mode [M] or [ETTL].
56