Thermalright Silver Arrow IB-E Bedienungsanleitung Seite 11

Step 4:
Step 4 : Mounting Plate Installation
Place the Heatsink Body on top of the CPU. Make the Mounting Plate go through the Heatsink Body.
And then use the two M3L6 screws to secure the Mounting Plate Take turns a few times and slowly
down.
Step 5:
Step 5 : Fan Installation
Pass one end of the Fan Clip through the mounting hole of the TY-143 Fan. Hook the Fan Clip through
the Fan Clip Slot. Pass the end of the Fan Clips through the mounting hole of the TY-143 Fan. Repeat
the procedure with the Fan Clip on the TY-143 Fan.
Step 6:
Step 6 : Installation Completed
Connect the two TY-143 Fans to the Male PWM end of the PWM Y-Cable. Then connect the female
PWM end of the PWM Y-Cable to the mainboard's PWM connector. Last connect the female 4 Pin
Molex connector of the PWM Y-Cable to the male PSU 4 Pin Molex Connector.
The Ultimate Cooling Solutions!
To PSU 4 Pin Molex
Connector
www.thermalright.com
8