Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Climatic classes
Look at chap. T
ECHNICAL
class of your appliance. Your appliance can be operated in rooms with
relevant room temperatures as named below.
CLIMATIC CLASS
SN
N
ST
T
3. Installation
3.1 Site
1. Completely remove the transport-protection (adhesive tape) of the accessories.
Be very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
2. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
3. Install the appliance in a dry and well-ventilated place.
4. Protect the appliance from direct sunlight.
5. The doors must open completely and without hindrance.
6. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
7. Connect the appliance to the mains properly.
8. The nameplate is situated inside the appliance or at the back.
Under counter installation
1. Remove the two screws at the back.
2. remobe the three screws at the front (underside).
D
for information about the climatic
ATA
AMBIENT TEMPERATURE
+10
0
→+32
0
C
C inner home temperature
+16
0
→+32
0
C inner home temperature
+16
0
→+38
0
C inner home temperature
+16
0
→+43
0
e.g. unheated cellar
25
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
