Climatic Classes; Ambient Temperature; Installation; Site - Schaub Lorenz SL 208C DD Bedienungsanleitung

2. Climatic classes

Look at chap. T
ECHNICAL
class of your appliance. Your appliance can be operated in rooms with
relevant room temperatures as named below.
CLIMATIC CLASS
SN
N
ST
T

3. Installation

3.1 Site

1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. Completely remove the transport-protection (adhesive tape) of the accessories.
Be very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
3. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is situated inside the appliance or at the back.

3.2 Ventilation

 The appliance must be properly vented.
a. Minimum distance of the back and sides of the appliance to a wall and
kitchen furniture = 20mm.
b. Minimum distance of the top of the appliance to the ceiling = 30 mm.
D for information about the climatic
ATA

AMBIENT TEMPERATURE

+10 0 →+32 0 C
+16 0 →+32 0 C inner home temperature
+16 0 →+38 0 C inner home temperature
+16 →+43 C inner home temperature
0 0
e.g. unheated cellar
28