Technical Specifications - EuroLite LED SCY-200 TCL DMX Bedienungsanleitung

Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Number of DMX channels:
DMX-512 connection:
Sound-control:
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
LED-Type:
Number of LEDs:
Beam angle:
Dimensions (LxWxH):
Weight:
Accessories:
EUROLITE RC-2 remote control 10m
EUROLITE TH-52 Theatre hook, silver
EUROLITE TH-52S Theatre hook, black
Safety bond AG-5 3x600mm up to 5kg
Please note: Every information is subject to change without prior notice. 18.03.2014 ©
230 V AC, 50 Hz ~
70 W
7/20
3-pin XLR
via built-in microphone
: 45° C
a
(steady state): 60° C
B
0.50 m
0.10 m
T 1 A, 250V
3 W TCL
6
60°
175 x 375 x 150 mm
2 kg
No.
51918558
58000642
58000643
58010360
26/26 00056924.DOC, Version 1.2