z Inserting / replacing batteries
(see diagram)
Remove the battery cartridge
by turning the base / battery compartment cap
anti-clockwise and pulling the battery cartridge
out.
Insert three 1.5 V
/ AA batteries.
Note: Ensure correct polarity. This is indicated on
the battery cartridge
4
10 GB/IE
out of the product
4
6
4
.
Insert the battery cartridge
and turn the base / battery compartment cap
clockwise onto the product.
z Switching on / off, choosing
the flash function
Press the ON / OFF button
lamp
on.
1
Press the ON / OFF button
SOS-flashing function will now start.
back into the product
4
6
to switch the LED
5
again. The
5
$0