Snooze Function; Channel Display - Bresser NATIONAL GEOGRAPHIC 9070400 Bedienungsanleitung

SNOOZE FUNCTION

1. If no key is pressed during the alarm period, the alarm will
turn off automatically.Alarm beeping lasts for 2 minutes.
2. Press [ SNOOZE ] button to stop the current alarm and enter
snooze. Alarm icon will be flashing continuously. The alarm
will sound again in 5 minutes. Snooze can be operated
continuously in 24 hours.
3. Press [ ALARM ] button to turn off alarm function.
WEATHER FORECAST
The indoor console contains a built-in sensitive pressure sensor
to predict the weather forecast for the next 12 hours:
Symbol
Weather
sunny cloudy
trend
DISPLAY COLOR CHANGE
1. Press [ LOOP ] key to activate the automatic color change.
Display changes continuously between 256 colors.
2. Press [ LOOP ] key again to disable color change function.
Press [ RAINBOW ] key several times to select a color from
the following and display it permanently:
white > red > orange > yellow > green > light-blue > deep blue
18
partly cloudy rainy
> purple
3. Press [ LOOP ] key again to disable color change function.
Press and hold [ TUNE ] key to run through the complete
spectrum with its 256 colors. Release the [ TUNE ] key when
reaching the desired color. This color will then be displayed
permanently.
CHECKING AND DELETING MAX/MIN TEMPERATURE
RECORDS
(Fig. 5)
1. Press [ MAX/MIN ] key to check the maximum temperature
records.
2. Press [ MAX/MIN ] key again to check the minimum
temperature records.
3. Press [ MAX/MIN ] key three times to close Min/Max
temperature records display.
snowy
2. Press and hold [ MAX/MIN ] for approx. 3 seconds to delete
the maximum and minimum temperature records with a 'beep'
tone sounds.

CHANNEL DISPLAY

The default channel is channel 1.
1. In normal time mode, press [ UP ] key to view the channels
from 1 to 3.
2. Press and hold [ UP ] key for approx. 2 seconds until a beep