Configuration Settings; Using Single Or Double Hotkeys - G&D TradeSwitch8-USB Installation Und Bedienung

Configuration settings

Using single or double hotkeys

If many application programs with key combinations are operated on one computer
or if different G&D devices are used in one cascade, the number of available key
combinations might be restricted.
In such a case, it is appropriate to apply double hotkeys.
How to enable single or double hotkeys:
1. Press
Hotkey+Backspace
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys listed below to enable single or double hotkeys:
S  enables single hotkeys
 disables double hotkeys
A
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the
Arrow
3. Press the
Space
 enables single hotkeys
No
 disables double hotkeys
Yes
4. Press the key to save your settings.
S
Depending on your settings, the active hotkey is converted into a double hotkey (or
vice versa):
Single Hotkey
Alt Gr
Win
Shift
Ctrl
Alt
(default:
Alt Gr+Backspace
or keys to select the
Arrow
key (repeatedly) to enable the usage of single or double hotkeys:
Configuration
) to enable the setup mode.
row.
Double Hotkey
Double Hotkey
Alt Gr+Ctrl
Win+Ctrl
Shift+Win
Ctrl+Shift
Alt+Shift
G&D TradeSwitch8-USB · 18