Changing The Single Hotkey - G&D TradeSwitch8-USB Installation Und Bedienung

Configuration

Changing the single hotkey

Press the hotkey and the
KVM switch. Pressing the hotkey and the select key simultaneously enables the
switching of channels.
If an application program or another G&D device uses the same hotkey within the
cascade, the hotkey can be changed.
NOTE:
The single hotkey
How to change the current hotkey:
1. Press Hotkey+Backspace
mode.
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys listed below to enable a certain hotkey:
Alt Gr  Enables Alt Gr hotkey
Win  Enables Win hotkey
Shift  Enables Shift hotkey
Ctrl  Enables Ctrl hotkey
Alt  Enables Alt hotkey
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the Arrow
3. Press the Space
Alt Gr  Enables Alt Gr hotkey
Win  Enables Win hotkey
Shift  Enables Shift hotkey
Ctrl  Enables Ctrl hotkey
Alt  Enables Alt hotkey
4. Press the S
19 · G&D TradeSwitch8-USB
Backspace key simultaneously to start the setup mode of the
Alt Gr is preset at default.
(default:
or Arrow keys to select the
key (repeatedly) to enable a certain hotkey:
key to save your settings.
Alt Gr+Backspace ) to enable the setup
Hotkey row.