Basic Rules For Safety; Warranty; Preparation For Work; Technical Data - HERKULES Schredder 4000 Profi Bedienungsanleitung

Instruction manual for Shredder 4000 Profi

Basic Rules for safety

1. As well as carefully following the safety
instructions it is important to adhere to all current
safety legislation!
2. No one under sixteen years of age should operated
this machine. New, young or inexperienced
operators must receive thorough training and never
work alone.
3. The machine operator should not allow anyone else
within the working area of the machine
4. No one should be near the discharge area of the
machine at any time when the machine is working.
5. Warning stickers are provided to ensure safe
operation. Do not ignore the advice given.
6. Operators must wear suitable protective clothing,
which is close fitting, and be provided with eye and
ear protection. Special attention must be paid to
good fitting suitable gloves and correct safety shoes.
7. All safety devices must be in operation throughout
the machine. Do not attempt to bypass them or
otherwise operate the machine when they are
defective.
8. Read the engine operators manual to ensure
satisfactory and safe engine performance.
9. Do not run the petrol engine in enclosed spaces.
Always ensure there is adequate ventilation.
10. Fully understand the correct function of the machine
before attempting to start.
11. Rotating parts, particularly the chopping motor, will
continue to rotate for a short time after stopping the
engine.
12. Be very careful when handling with fuel particular
do not re-fuel near naked flames, any possible
ignition source or when the engine is hot. Do not
smoke when re-fuelling.
13. Before re-fuelling stop the engine and allow to cool.
It is always better to refuel the engine before work
whilst the engine is cold. Do not re-fuel in enclosed
areas and avoid fuel spillage by using correct
containers and funnels. In particular, keep the
machine clean to avoid the build up of inflammable
dirt.
14. Operate only on solid, firm ground.
15. Never leave the machine unattended with the engine
running and always shut off the fuel tap when not in
use. Disconnect the main supply plug on units with
electric motors.
16. With electric powered machines, always disconnect
the main supply by removing the plug before
working on the unit. With petrol engines, always
disconnect the sparking plug lead when working on
the machine.
17. The belt drive and safety switches must be correctly
attached, otherwise the safety switch will prevent the
machine from starting.

Warranty

As covered in our conditions of sale, we guarantee the
Shredder 4000 Profi for a period of one year from purchase
date for private use and six month for professional and
commercial use. Warranty is only valid if enclosed Warranty
Registration Form submitted for any repairs. In particular
this damage through misuse or operation without safety
features..
Description
The Shredder 4000 Profi is equipped with a set of shredding
hammers and a shredding disk. The shredding disk handles
branches etc up to a maximum of 8cm diameter, as well as
twigs, leaves and other material which can be fed through the
main hopper.
Preparations for work
Before using the machine, check that nothing has been left in
either of the two feed hoppers. In case of petrol engine
machines, check that the engine is full of fuel and oil (please
check engine manufacturers manual for details). For electric
powered units it is vital to check that the rotation direction is
correct, if not have the correct wiring carried out by a
qualified electrician. In the case of three phase motors, ensure
that the cable has five conductors of at least 1.5 square mm
cable section and use a 16 A fuse.
Check the tensioning of the V-belt.

Technical Data

Type 4000
380V electric
Engine 3x 400V
3,7 kW
Protection 16A fuse
Cutting hammer 32
Clearing hammer 4
Cutter blades 1
Safety switches 2
Cutting screen (optional)
A cutting screen can be used to ensure that dry
woody material will be very finely shreddered.
Please check with your supplier for technical
information.
6
4000
petrol-engine
Honda GX 270
6,6 kW
32
4
1
2