Operating Elements And Connections - EuroLite EDX-1 MK2 Bedienungsanleitung

OPERATING ELEMENTS AND CONNECTIONS

No. Element
1 Safety socket
2 Display
3 Button MENU
4 Button UP
5 Button DOWN
6 HTP fader
7 Remote control
8 Power cord
9 Fuse housing
10 DMX input
11 DMX output
12 3.5 mm jack
Function
To connect the load (max. 10 A)
Indicates the current value or setting:
A = DMX address,
P = Dimmer preset (brightness),
L = Dimmer limit,
d or S = Dimmer / Switch function,
S-off = Switch function off,
S-on = Switch function on or at 50% via sliding fader
To switch between the different menu items
To increase values
To decrease values
To directly adjust the brightness; disabled when remote control (7)
is plugged in (HTP = Highest takes precedence)
External sliding fader with the same functions as the HTP fader (6)
To connect the device to 230 V power outlet
Houses a 10 A, 250 V, 5 x 20 mm fuse
3-pin XLR male socket, used to receive DMX data
3-pin XLR female socket, used to send DMX data
To connect the external fader (7)
16/24 00116602, Version 1.0