Connections - Omnitronic LH-070 Bedienungsanleitung

CONNECTIONS

• With a Direct-Injection-Box, you can directly take a sound signal from a highly resistant cable, e.g. between
guitar and amplifier, and send it directly to the mixer input.
• In order to obtain highest sound-quality, only use high-quality cables for connecting the devices. Make sure
that the cables are properly fixed.
• Connect your signal source (e.g. guitar, bass guitar, keyboard, etc.) to the Input-socket.
Occupation mono 1/4" jack-plug:
Tip Sleeve
In Phase (+) Ground
• If there is noise please use the Ground Lift-switch You can also adapt the Input-level (+20 dB for extremely
low signal levels, 0 dB for e.g. guitars, -30 dB for line-instruments).
• HI CUT: With the Hi Cut-switch, you can activate the lowpass filter (8 kHz).
• Phase Reverse: In order to invert the cable occupation.
• Connect the microphone input of your stage mixer to the Output-socket.
10/11 10355070_V_1_0.DOC