Connections - Omnitronic LH-060 Bedienungsanleitung

CONNECTIONS

• With a Direct-Injection-Box, you can directly take a sound signal from a highly resistant cable, e.g. between
guitar and amplifier, change the impedance, lift the ground, attenuate the signal and send it directly to the
mixer input.
• In the mono-mode you can splite the signal to two outputs.
• In order to obtain highest sound-quality, only use high-quality cables for connecting the devices. Make sure
that the cables are properly fixed.
• Connect your signal source (e.g. guitar, bass guitar, keyboard, etc.) to the Input-socket.
Occupation jack plug:
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
Balanced use of
stereo 1/4" jack plugs
Tip =
hot (+)
Ring =
cold (-)
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
9/10 10355060_V_1_0.DOC