Pkm 8090GZ Bedienungsanleitung Seite 28

Replacing of the illuminant
Do not touch the illuminant with your hands. The sweat on your fingers will
reduce the operating time of your new illuminant. Use a thin cloth or a thin
glove.
1.
WARNING! Disconnect the appliance from the energy supply.
2. Disconnect the light wiring point which is located inside the hood (behind the
grease filter).
3. Using a screwdriver, remove the illuminant holder and wiring from the hood.
4. Replace the old illuminant by a new one of the same kind and power.
--- m = 0,45 m
Carbon filters
Conventional carbon filters cannot be cleaned. The capacity of these filters is
limited. You can use such filters for about 3-6 months. Replace a depleted filter.
Find further information on the filter packaging.
Required minimum distance to surfaces such as pot lids, oven
cloths etc. to avoid any hot parts and risk of fire.
Only use self shielded illuminants to avoid hot parts, risk of fire
and exposure to UV-radiation.
28