MOUNTING LDMG2SPS
There are two ways to attach the MAUI G2 speaker column to the base.
1. Installation with the 55 mm rod attachment.
Attach the rod attachment to base C with M20 special screw B, ensuring a firm grip. Screw adapter D (with M20 thread) onto the rod attachment
as far as it will go. Now attach speaker column E flush to the adapter (slightly loosen the 3 mm hexagonal grub screws if necessary). Steel guide
pins facilitate correct assembly and at the same time ensure a secure hold. The electrical contact for the signal supply to the speaker column will
be automatically established. Now attach the adapter flush to the subwoofer with the 4 steel pins and connect both adapters using the supplied
speaker cable (4-core with speakON-compatible connectors).
2. Direct attachment to the base, without rod attachment.
Attach adapter D (with M20 thread) to base C with M20 special screw B, ensuring a firm grip. Now attach speaker column E flush to
the adapter (slightly loosen the 3 mm hexagonal grub screws if necessary). Steel guide pins facilitate correct assembly and at the same
time ensure a secure hold. The electrical contact for the signal supply to the speaker column will be automatically established. Now
attach the adapter flush to the subwoofer with the 4 steel pins and connect both adapters using the supplied speaker cable (4-core with
speakON-compatible connectors).
1
C
E
D
A
B
2
E
D
C
B
11