Powerfix IAN 78526 Bedienungsanleitung Seite 15

Mounting
Note: The recommended installation height is be-
tween 1.8 and 2.5 m.
Note: Before installation, ensure an optimal direc-
tion of motion. The motion detector reacts more
sensitively to movement from the side than to motion
from the front (see Ill. A). Therefore, we recommend
installing the motion detector to the side of the
1
direction of movement.
Note: To attach the base plate
it is necessary
2
to drill two holes. We recommend a drill with a
6 mm diameter.
Remove the screws from the front of the motion
4
detector by screwing them in the direction of
rotation (see Ill. B).
Insert the cable through the cable opening of the
base plate .
2
Screw the base plate to the desired position.
2
Connect the cable to the screw terminal of the
3
motion detector as depicted in Ill. C.
14 GB/IE